This article is intended for installers and end users.

What do the LED colors on your Charge Amps Halo mean?

The LED behavior for the Charge Amps Halo charging station is specified in the user manual:
Section 4.4 (page 11) in the Charge Amps Halo User Manual

Note that the colors refer to the LED indicators on the outside of the charging station (Charge Amps Halo).

For OCPP log statuses shown in Charge Amps Cloud – Partner Portal, see the separate article about OCPP statuses.

4.4 LED indicators

4.4.1 General

Status	Center light	Ring light
Ready for charging	White light	Solid light
Charging	Solid light	Circulating light
Charging complete (paused by vehicle)	White light	Solid light
Charging paused* (paused by Halo)	Blinking green light	Solid light

* Load balancing may take up to 2 minutes.

4.4.2 RFID tag verification

Status	Center light	Ring light
Waiting for RFID tag	Blinking light	Solid light
RFID tag approved	Green light	Solid light
RFID tag not approved	Red light flashes once	Solid light

4.4.3 Error indications

Error	Center light	Ring light
Ground fault or vehicle fault*	Red light	No light

* Action: Check that the vehicle connector is intact. Turn off the power and restart after a few minutes.

LED-status and indicators for Charge Amps Halo

What do the LED colors on your Charge Amps Halo mean?

4.4 LED indicators

4.4.1 General

4.4.2 RFID tag verification

4.4.3 Error indications